NLC453232T-4R7K-PF

(2/15)

I

N

D

U

C

T

O

R

S

001-01 / 20130731 / inductor_commercial_decoupling_nlc_en.fm

REMINDERS FOR USING THESE PRODUCTS

Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS

Please pay sufficient attention to the warnings for safe designing when using these products.

The storage period is less than 6 months.  Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or 

less).

If the storage period elapses, the soldering of the terminal electrodes may deteriorate.

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).

Before soldering, be sure to preheat components.

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature 

does not exceed 150°C.

Soldering corrections after mounting should be within the range of the conditions determined in the specifications.

If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.

When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to 

the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.

Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal 

design.

Carefully lay out the coil for the circuit board design of the non-magnetic shield type.

A malfunction may occur due to magnetic interference.

Use a wrist band to discharge static electricity in your body through the grounding wire.

Do not expose the products to magnets or magnetic fields.

Do not use for a purpose outside of the contents regulated in the delivery specifications.

The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications 

equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement 

equipment, industrial robots) under a normal operation and use condition.

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or 

quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to 

society, person or property.

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions 

set forth in the each catalog, please contact us.

(1) Aerospace/Aviation equipment

(2) Transportation equipment (cars, electric trains, ships, etc.)

(3) Medical equipment

(4) Power-generation control equipment

(5) Atomic energy-related equipment

(6) Seabed equipment

(7) Transportation control equipment

(8) Public information-processing equipment

(9) Military equipment

(10) Electric heating apparatus, burning equipment

(11) Disaster prevention/crime prevention equipment

(12) Safety equipment

(13) Other applications that are not considered general-purpose 

applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing 

protection circuit/device or providing backup circuits in your equipment.

REMINDERS

NLC453232T-4R7K-PF Datasheet Related Products:
NLC453232T-4R7K-PF Information:
Part No.
NLC453232T-4R7K-PF
Description
FIXED IND 4.7UH 650MA 270 MOHM
File Size
419949 bytes
Page Size
595.22 x 842 pts (A4)
All Pages
15
Manufacturer
TDK Corporation
Homepage
http://www.tdk.com/
Logo