Tape & Reel (TR)-method packaging is used for clock ICs. The 20-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 20 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3V. The input of this clock generator is designed to be CMOS, TTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 3GHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.3V. As far as the supply voltage is concerned, clock PLL can be used with 2.6V~3.3V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with Clock logic levels. This electronic component is usually classified as a Clock/Frequency Synthesizer (RF/IF) component. The clock-generating IC is a 20-bit device designed specifically for microprocessors. You can find related electrical components to the base part number ADF4218. It is possible to connect to the frequency generators via 20 pins. There is a maximum supply voltage of 5V that clock generator can handle. This clock PLL features ALSO REQUIRES A 3V TO 5.5V SUPPLY for better clock signal output. For the RF synthesizer to function properly, a supply current of 7mA must be provided. There are 2 elements in this clock generator which has a low jitter performance.
ADF4218LBRUZ-REEL Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 5V
ADF4218LBRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADF4218LBRUZ-REEL Clock Generators applications.