9DBU0731AKILF Overview

There are 40 terminations in it. The part provides a voltage of 1.5V volts. The peak reflow temperature is used to run 260. 1 are present on the device. normaloperation has a maximum frequency of 167MHz. Currently, there are 2006 publications of the part. The Surface Mount mounting method is recommended. There are 40 pins on this device. The board has 40 pins. The minimum working temperature of this device cannot be lower than -40°C. There should be a temperature below 85°C during operation. 1.5V should be the supply voltage. A 2 output can be maintained on the device. According to the supply voltage, this part operates at 1.575V. In order to maintain a device's supply voltage greater than 1.425V. Circuits application is possible to search for related parts based on the 9DBU family. Circuits application uses a logic IC type of LOW SKEW CLOCK DRIVER. When the supply current is set to 5mA, this part can operate.

9DBU0731AKILF Features

Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 40 Pins
operate supply voltage at the range of 1.5V
Logic IC Type: LOW SKEW CLOCK DRIVER

9DBU0731AKILF Applications

There are a lot of Integrated Device Technology (IDT)
9DBU0731AKILF application specific timer applications.

• Ethernet switch/router
• PCI Express 2.0/3.0
• Broadcast video/audio timing
• Processor and FPGA clocking
• Any-frequency clock conversion
• MSAN/DSLAM/PON
• Fibre Channel, SAN
• Telecom line cards
• 1 GbE and 10 GbE
• Servers, Storage, Search Acceleration