IDT71V424S15PHI8 Overview

RAM, SRAM - Asynchronous is the type of memory it has. It is supplied votage within Tape and Reel. There is a TSOP case embedded in it. The chip contains 44 terminations. As many as 1 functions are supported for comprehensive working. Memory devices such as this one are designed to be powered by 3.3V and should be used as such. The memory device has an 44-pin package, which encloses it in a small package. The memory device in question has 44 pins, thus indicating that it has 44 memory locations that can be accessed. This memory runs on an 3.3V operating supply voltage. Using Surface Mount mounting, this chip offers straightforward and high-efficiency mounting. The nominal supply current of this memory component is 160mA. The memory chip has 1 ports for granting read/write access to one memory address. I/O port addresses on this device are mapped to memory addresses of COMMON bits. In order for this device to function properly, its operating temperature must not be less than -40°C. The temperature should not exceed 85°C degrees Celsius. The component is usually referred to as a type of SRAMs. It is recommended that this part be supplied with at least 3V volts. There shall be a voltage limit of 3.6V for its operation.

IDT71V424S15PHI8 Features

Package / Case: TSOP
44 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON

IDT71V424S15PHI8 Applications

There are a lot of Integrated Device Technology (IDT) IDT71V424S15PHI8 Memory applications.

• mainframes
• eDRAM
• printers
• embedded logic
• networking
• Camcorders
• eSRAM
• multimedia computers
• cell phones
• data buffer