SI5345A-B03332-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 64 terminations. For this clock generator ic, a voltage of 1.8V is required. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. A clock generating device that produces high-quality clock output frequencies of 712.5MHz is available for sale. If the ambient temperature is below -40°C, the clock PLL may not start up.

SI5345A-B03332-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 712.5MHz

SI5345A-B03332-GMR Applications

There are a lot of Silicon Labs SI5345A-B03332-GMR Clock Generators applications.

• Automatic control system test
• Wireless handsets
• Electronic equipment
• Wi-Fi routers
• Antenna automatic tracking
• Frequency Modulation (FM) stereo decoders
• Televisions
• Radio receivers
• Aerospace and defense
• Remote telemetry and instrumentation