SI5350A-B06386-GTR Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. Clock PLL is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. In it, there are 10 terminations to be found. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 1.89V of power. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. With ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.

SI5350A-B06386-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B06386-GTR Applications

There are a lot of Silicon Labs SI5350A-B06386-GTR Clock Generators applications.

• Microprocessor clock multipliers
• Televisions
• Cable television converter boxes
• Local oscillators (LOs)
• Aerospace and defense
• PMR (Professional Mobile Radio)
• Skew suppression
• MRI
• Instrument
• Satellite receivers