AT25DF081A-SSH-B Overview

In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 8-SOIC (0.154, 3.90mm Width) case surrounds memory ics. It is estimated that the memory size on the chip is 8Mb 256Bytes x 4096 pages. As with most mainstream devices, this one uses FLASH-format memory. Due to its wide temperature range of -40°C~85°C TC, this device is well suited to a wide range of applications that require high performance. With 2.7V~3.6V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 100MHz. The ic memory chip comes in a package with 8 pins that allows it to be connected to a computer. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 20mA for its nominal supply current when it comes to the memory component. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with. Nonvolatile memory arrays require 2.7V programming voltages to change their states. An 20mA volt maximum current is required to run it.

AT25DF081A-SSH-B Features

Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Operating Supply Voltage:3.3V

AT25DF081A-SSH-B Applications

There are a lot of Adesto Technologies
AT25DF081A-SSH-B Memory applications.

• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders