AT25QL128A-SUE-T

join

new-10%

Manufacturer part number:AT25QL128A-SUE-T

Manufacturer:Adesto Technologies

Description:Memory IC 5.28mm mm

Case Package:SOT-23

Datasheet:AT25QL128A-SUE-T Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	18 Weeks
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.209, 5.30mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
Technology	CMOS
Voltage - Supply	1.7V~2V
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	1.27mm
JESD-30 Code	S-PDSO-G8
Supply Voltage-Max (Vsup)	2V
Supply Voltage-Min (Vsup)	1.7V
Memory Size	128M 16M x 8
Memory Type	Non-Volatile
Operating Mode	SYNCHRONOUS
Clock Frequency	133MHz
Memory Format	FLASH
Memory Interface	SPI - Quad I/O, QPI
Organization	128MX1
Memory Width	1
Write Cycle Time - Word, Page	150μs, 5ms
Memory Density	134217728 bit
Parallel/Serial	SERIAL
Programming Voltage	1.8V
Height Seated (Max)	2.16mm
Length	5.28mm
Width	5.28mm
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
1	$1.29000	$1.29
500	$1.2771	$638.55
1000	$1.2642	$1264.2
1500	$1.2513	$1876.95
2000	$1.2384	$2476.8
2500	$1.2255	$3063.75

AT25QL128A-SUE-T Overview

Its memory type can be classified as Non-Volatile. It comes in a Tape & Reel (TR). The file is embedded in a 8-SOIC (0.209, 5.30mm Width) case. A memory chip with a capacity of 128M 16M x 8 is used on this device. The device uses a mainstream FLASH-format memory. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. There is a voltage range of 1.7V~2V for the supply voltage. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. The comprehensive working procedure of this part involves 1 functions. The memory device is designed to be supplied with an 1.8V volt power supply in order to operate properly. With a clock frequency of 133MHz, the memory rotates on its own. A programming voltage of 1.8V is required to change a nonvolatile memory array's state.