AT25SL128A-MHE-T

join

new-10%

Manufacturer part number:AT25SL128A-MHE-T

Manufacturer:Adesto Technologies

Description:Memory IC 6mm mm

Case Package:SOT-23

Datasheet:AT25SL128A-MHE-T Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	8-UDFN Exposed Pad
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
Technology	CMOS
Voltage - Supply	1.7V~2V
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	1.27mm
JESD-30 Code	R-PDSO-N8
Supply Voltage-Max (Vsup)	2V
Supply Voltage-Min (Vsup)	1.7V
Memory Size	128Mb 16M x 8
Memory Type	Non-Volatile
Operating Mode	SYNCHRONOUS
Clock Frequency	104MHz
Memory Format	FLASH
Memory Interface	SPI
Organization	128MX1
Memory Width	1
Write Cycle Time - Word, Page	150μs, 5ms
Memory Density	134217728 bit
Parallel/Serial	SERIAL
Programming Voltage	1.8V
Height Seated (Max)	0.6mm
Length	6mm
Width	5mm
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
1	$2.180000	$2.18
10	$2.056604	$20.56604
100	$1.940192	$194.0192
500	$1.830370	$915.185
1000	$1.726764	$1726.764

AT25SL128A-MHE-T Overview

As far as memory types are concerned, Non-Volatile is considered to be its memory type. There is a Tape & Reel (TR) case available. It is available in 8-UDFN Exposed Pad case. It is estimated that the memory size on the chip is 128Mb 16M x 8. There is a mainstream memory format used by this device, which is called FLASH-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. The device is capable of handling a supply voltage of 1.7V~2V volts. A Surface Mount mounting type is recommended for this product. The chip has 8 terminations. There are 1 functions supported by this part as part of the comprehensive working process. In order to power this memory device, 1.8V will be necessary. There is a clock frequency rotation of the memory within a 104MHz range. Nonvolatile memory arrays require 1.8V programming voltage to change their state.