AT25XV041B-MHV-T

join

new-10%

Manufacturer part number:AT25XV041B-MHV-T

Manufacturer:Adesto Technologies

Description:Memory IC 6mm mm

Case Package:SOT-23

Datasheet:AT25XV041B-MHV-T Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	8-UDFN Exposed Pad
Surface Mount	YES
Operating Temperature	-40°C~85°C TC
Packaging	Cut Tape (CT)
Published	2015
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Technology	CMOS
Voltage - Supply	1.65V~4.4V
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	1.27mm
JESD-30 Code	R-PDSO-N8
Supply Voltage-Max (Vsup)	4.4V
Supply Voltage-Min (Vsup)	1.65V
Interface	SPI, Serial
Memory Size	4Mb 512K x 8
Memory Type	Non-Volatile
Operating Mode	SYNCHRONOUS
Clock Frequency	85MHz
Memory Format	FLASH
Memory Interface	SPI
Organization	4MX1
Memory Width	1
Write Cycle Time - Word, Page	8μs, 2.75ms
Memory Density	4194304 bit
Programming Voltage	1.8V
Height Seated (Max)	0.6mm
Length	6mm
Width	5mm
RoHS Status	ROHS3 Compliant

Quantity	Unit Price	Ext. Price
1	$1.720000	$1.72
10	$1.622642	$16.22642
100	$1.530794	$153.0794
500	$1.444145	$722.0725
1000	$1.362401	$1362.401

AT25XV041B-MHV-T Overview

A Non-Volatile-type memory can be classified as the memory type of this device. Case Cut Tape (CT) is available. The case is embedded in 8-UDFN Exposed Pad. This chip has an 4Mb 512K x 8 size of memory on it, so a lot of data can be stored on it. This device uses a FLASH-format memory, which is of mainstream design. With an extended designed operating temperature of -40°C~85°C TC, this device is capable of lots of demanding applications. It is capable of handling a voltage supply of 1.65V~4.4V. It is recommended that the mounting type be Surface Mount. 8 terminations are planted on the chip. In total, 1 functions are supported by this part. In order to function properly, this ic memory chip should be powered by a voltage of 1.8V. It is important to note that the memory has a clock frequency rotation within the range of 85MHz. A programming voltage of 1.8V is required to change a nonvolatile memory array's state.