Surface Mount 8 Pin Memory IC 1 Mb kb 5.35mm mm 25mA mA 8b b
SOT-23
AT45DB011D-SH-B Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.209, 5.30mm Width)
Number of Pins
8
Weight
540.001716mg
Operating Temperature
-40°C~85°C TC
Packaging
Tube
Published
1997
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Technology
CMOS
Voltage - Supply
2.7V~3.6V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
1.27mm
Pin Count
8
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
2.7V
Interface
SPI, Serial
Memory Size
1Mb 264Bytes x 512 pages
Nominal Supply Current
25mA
Memory Type
Non-Volatile
Max Supply Current
25mA
Clock Frequency
66MHz
Access Time
6 ns
Memory Format
FLASH
Memory Interface
SPI
Data Bus Width
8b
Organization
1MX1
Write Cycle Time - Word, Page
4ms
Address Bus Width
1b
Density
1 Mb
Standby Current-Max
0.000025A
Sync/Async
Synchronous
Word Size
8b
Programming Voltage
2.7V
Serial Bus Type
SPI
Endurance
100000 Write/Erase Cycles
Data Retention Time-Min
20
Write Protection
HARDWARE/SOFTWARE
Height
1.91mm
Length
5.35mm
Width
5.4mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
RoHS Compliant
Lead Free
Lead Free
AT45DB011D-SH-B Product Details
AT45DB011D-SH-B Overview
As far as memory types are concerned, Non-Volatile is considered to be its memory type. It comes in a Tube. The case is embedded in 8-SOIC (0.209, 5.30mm Width). This chip has an 1Mb 264Bytes x 512 pages size of memory on it, so a lot of data can be stored on it. As with most mainstream devices, this one uses FLASH-format memory. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. With 2.7V~3.6V as the supply voltage, it is capable of handling memory ics. Its recommended mounting type is Surface Mount. There are 8 terminations on the chip. In total, this part supports 1 functions. There is a requirement for 3V to be supplied to this ic memory chip in order to operate. It has a clock frequency of 66MHz. This memory device is enclosed in a 8-pin package. I have noticed that the memory device has 8 pins, which indicates that it has 8 locations in the memory. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. In terms of its nominal supply current, this memory component is rated at 25mA. Integrated into this memory is a SPI-type serial bus that facilitates data transmission to the CPU. 2.7V programming voltage is required to change the state of certain nonvolatile memory arrays. An 25mA volt maximum current is required to run it.