ALD1502PAL Overview

The timer clock is enclosed in a packaging that is attached to the 8-DIP (0.300, 7.62mm). Ensure that the programmable timer's frequency is set to 2.5MHz.It is used to pack in Tube case. The mounting type recommended is Through Hole.Programmable timers can provide 2V~12V voltages.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Through Hole. To keep the clock timer's supply current at 50μA. The operating supply voltage is rated at 50μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 1.

ALD1502PAL Features

Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Through Hole
Current - Supply：50μA
Max Operating temperature at 0°C
1 Timers/Counters

ALD1502PAL Applications

There are a lot of Advanced Linear Devices Inc. ALD1502PAL Programmable Timers & Oscillators applications.

• Tamper Detection
• Internet of Things (IoT)
• Remote current sensor
• Safety and Security Platforms
• Electric Vehicles
• Sensor Node
• Motor control
• Delay circuits
• Domestic appliances
• Consumer Electronics