ALD1701BSAL Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. 8 pins are located on the operational amplifiers. The input offset voltage is 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 120μA . It is recommended to keep the voltage gain at 107.96dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below 0°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 70°C. The operating supply voltage of the buffer op amp is rated at 5V. It is recommended that you use an 120μA power supply with this electrical part in order for it to operate correctly. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 6V.

ALD1701BSAL Features

107.96dB voltage gain
Output Type: Rail-to-Rail

ALD1701BSAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD1701BSAL Instrumentational OP Amps applications.

• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation