ALD1701SAL Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 4.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 120μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 107.96dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. The operating supply voltage of the buffer op amp is rated at 5V. For optimal performance, this electrical part should be connected to a supply with a current of 120μA. In order to conduct this part, you will need to provide dual supply voltages of 6V volts.

ALD1701SAL Features

107.96dB voltage gain
Output Type: Rail-to-Rail

ALD1701SAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD1701SAL Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering