ALD2302SAL Overview

The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, NMOS, Push-Pull, TTL .The part is shipped by Tube .This is a typical comparator of type General Purpose .Currently, it consists of only 2 elements.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.8 pins are available on the comparator.A quiescent current of 500μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 500μA .An excess of current supply over 500μA could result in malfunction of the comparator.There is no recommendation for temperatures higher than 70°C .Temperatures below 0°C are not suitable for the device.Compatibility is defined as 6V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 2V is allowed for this comparator.The output quality of 2 channels is maintained by cooperating with each other.

ALD2302SAL Features

CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA

ALD2302SAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2302SAL linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices