ALD2321APCL Overview

The product is packaged in 16-DIP (0.300, 7.62mm) to facilitate transportation.Output type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL is used for this comparator.This device is designed in Tube case.It's a typical General Purpose comparator.This element consists of 2 elements in total.The recommended mounting type is Through Hole .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .16 pins are present on the comparator.The comparator presents a quiescent current of 180μA volts.The PCB or other board can be mounted using the Through Hole on it.Normally, the nominal supply current should be 180μA .The compartator could be damaged if the current supply exceeds 180μA .Electronic comparator is possible to input up to 20pA current into the device.Temperatures above 70°C are not recommended.A temperature lower than 0°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 10V .The comparator is capable of operating at a minimum supply voltage of 3V .For the output to be of high quality, 2 channels must cooperate together.Comparator electronics comes from the series of EPAD® comparator parts.

ALD2321APCL Features

CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321APCL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2321APCL linear comparators applications.

• General-Purpose, Low-Voltage Applications
• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring