ALD2321BSCL Overview

In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL is being used.We ship the part through Tube .In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 16 pins.There is 180μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 180μA .A current supply greater than 180μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 20pA current into the device.In general, temperatures higher than 70°C are not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 10V volts.Using a voltage as low as 3V is possible for this comparator.For the output quality to be maintained, 2 channels work together.Comparator electronics is part of the EPAD® comparator series.

ALD2321BSCL Features

CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321BSCL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2321BSCL linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications