ALD2321SCL Overview

For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .There is a CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tube .The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 16 .As a result, this comparator displays a quiescent current of 180μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 180μA when using the device.A supply current exceeding 180μA may result in the comparator malfunctioning.Comparator electronics is not recommended to operate the system at a temperature above 70°C .Comparator electronics cannot be used at a temperature below 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 10V .A minimum supply voltage of 3V is permitted for this comparator.To ensure a high level of output quality, 2 channels work together.A comparator part from the EPAD® series is used in this part.

ALD2321SCL Features

CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321SCL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2321SCL linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets