ALD2332APAL Overview

A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .The comparator has a CMOS, NMOS, Push-Pull, TTL output.The part will be shipped by Tube .Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There is a quiescent current of 500μA in this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current be 500μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .A maximum current of 20pA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 103.52dB .This part is from the EPAD® comparator series.

ALD2332APAL Features

CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB

ALD2332APAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2332APAL linear comparators applications.

• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics