ALD2332ASAL Overview

For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, NMOS, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tube .The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .As a result, this comparator displays a quiescent current of 500μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 500μA when using the device.A supply current exceeding 500μA may result in the comparator malfunctioning.You can input a maximum current of 20pA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 103.52dB .To ensure a high level of output quality, 3 channels work together.A comparator part from the EPAD® series is used in this part.

ALD2332ASAL Features

CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB

ALD2332ASAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2332ASAL linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets