ALD2702PAL Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. The mounting type that is recommended for this electrical part is Through Hole. With regard to operating temperature, this op amp functions well at 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 2mA . Voltage gain should remain at 107.96dB. There are 2 circuits on op amps. As far as the device is concerned, buffer amplifier has 2 channels. One of the many benefits of this op amp ic is that it emits Push-Pull, Rail-to-Rail signals. The temperature should not be lower than 0°C for operational amplifier ics to operate. You should only use op amp buffer at temperatures that are no higher than 70°C. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This electronic part is recommended to be used with an 2mA supply for best performance. In order to conduct this part, you will need to provide dual supply voltages of 6V volts.

ALD2702PAL Features

107.96dB voltage gain
Output Type: Push-Pull, Rail-to-Rail

ALD2702PAL Applications

There are a lot of Advanced Linear Devices Inc. ALD2702PAL Instrumentational OP Amps applications.

• single/dual op amp sum and difference circuits
• Signal filtering
• Proportional operation circuits
• Car stereo
• Power control
• Proportional counter tubes
• High input resistance broadband
• Power transmission
• Weak signal detection
• Scintillation detectors