ALD2706APAL Overview

There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. The op amp ic has an array of 8 pins on it. Op amp rates 2mV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. A supply current of 50μA can be used to operate this linear amplifier. 109.54dB should remain the voltage gain. There are 2 circuits on op amps. As far as the device is concerned, buffer amplifier has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. You should not use op amp above 70°C . The operating supply voltage of the buffer op amp is rated at 5V. We recommend that you use this electronic part with an 50μA supply in order to get the best performance from it. The dual supply voltage of 6V should be used for the conduct of this electronic component.

ALD2706APAL Features

109.54dB voltage gain
Output Type: Rail-to-Rail

ALD2706APAL Applications

There are a lot of Advanced Linear Devices Inc. ALD2706APAL Instrumentational OP Amps applications.

• High-frequency data acquisition systems
• High/low-pass filter circuit
• Signal filtering
• Commercial audio systems
• Exponential operation circuits
• Vehicle electronics
• Information processing
• Large motor controllers
• Comparator
• Voltage regulation circuit