ALD2706PAL Overview

There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The op amp ic has an array of 8 pins on it. There is an input offset voltage of 10mV for this buffer op amp. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . This op amp can operate from a supply current at 50μA. Keeping the voltage gain at 109.54dB is the best course of action. A linear amplifier like this has 2 circuits on it. Buffer op amp is equipped with 2 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. To operate this buffer amplifier, the temperature must not be lower than 0°C. Use op amps only at temperatures no higher than 70°C. The operating supply voltage of the buffer op amp is rated at 5V. As a recommendation, this electronic component should be used with a power supply that can deliver 50μA. The dual supply voltage of 6V should be used for the conduct of this electronic component.

ALD2706PAL Features

109.54dB voltage gain
Output Type: Rail-to-Rail

ALD2706PAL Applications

There are a lot of Advanced Linear Devices Inc. ALD2706PAL Instrumentational OP Amps applications.

• Tablets
• Proportional counter tubes
• Medical imaging
• Voltage regulation circuit
• Signal operation
• Large motor controllers
• Comparator
• Cinema or auditorium audio system
• Radiation thermometry transducers
• Thermocouples