ALD2721EPBL Overview

It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 35μV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 200μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 107.96dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. The operating supply voltage of the buffer op amp is rated at 5V. For optimal performance, this electrical part should be connected to a supply with a current of 200μA. In order to conduct this part, you will need to provide dual supply voltages of 5V volts. Buffer op amp series numbers are indicated by the EPAD®.

ALD2721EPBL Features

107.96dB voltage gain
Output Type: Rail-to-Rail

ALD2721EPBL Applications

There are a lot of Advanced Linear Devices Inc.
ALD2721EPBL Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering