4 Channels 15mA per Channel 1pA 65 dB Instrumentational OP Amps 5V 6.5V~12V ±3.25V~6V 14-SOIC (0.154, 3.90mm Width)
SOT-23
ALD4704BSBL Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-SOIC (0.154, 3.90mm Width)
Number of Pins
14
Supplier Device Package
14-SOIC
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2010
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Output Type
Push-Pull, Rail-to-Rail
Operating Supply Voltage
5V
Number of Channels
4
Number of Circuits
4
Operating Supply Current
10mA
Nominal Supply Current
13mA
Output Current
15mA
Current - Supply
10mA
Slew Rate
5V/μs
Amplifier Type
General Purpose
Common Mode Rejection Ratio
65 dB
Current - Input Bias
1pA
Voltage - Supply, Single/Dual (±)
6.5V~12V ±3.25V~6V
Output Current per Channel
15mA
Input Offset Voltage (Vos)
2mV
Gain Bandwidth Product
2.1MHz
Voltage Gain
100dB
Voltage - Input Offset
2mV
Current - Output / Channel
15mA
Max Dual Supply Voltage
6V
Min Dual Supply Voltage
3.25V
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
56
$8.83554
$494.79024
ALD4704BSBL Product Details
ALD4704BSBL Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 10mA , this buffer op amp will be able to operate. Keeping the voltage gain at 100dB is the best course of action. The buffer amp consists of 4 circuits in total. 4 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Push-Pull, Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. You should not use op amp above 70°C degrees. The operating supply voltage of the buffer op amp is rated at 5V. A supply of 10mA or higher is recommended for use with this electronic part. This electronic part should be conducted with a dual supply voltage of 6V volts for this part.
ALD4704BSBL Features
100dB voltage gain Output Type: Push-Pull, Rail-to-Rail
ALD4704BSBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4704BSBL Instrumentational OP Amps applications.