ALD555SAL Overview

There is a 8-SOIC (0.154, 3.90mm Width) enclosure with the programmable timer. Ensure that the programmable timer's frequency is set to 2MHz.It is used to pack in Tube case. The recommended mounting type is Surface Mount.When a programmable timer is configured to operate at 2V~12V volts, the voltage that is supplied can be 2V~12V.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 100μA. The operating supply voltage is rated at 100μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 8 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 1.

ALD555SAL Features

Operate frequency at 2MHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply：100μA
Max Operating temperature at 0°C
1 Timers/Counters

ALD555SAL Applications

There are a lot of Advanced Linear Devices Inc. ALD555SAL Programmable Timers & Oscillators applications.

• Remote Sensors
• Precision timing
• Battery Powered Systems
• Remote current sensor
• Smart Key
• Power-Gating Applications
• Clutch Actuator circuit
• Intruder Detection
• Battery-Powered Systems
• Internet of Things (IoT)