A3983SLPTR-T Overview

Drivers controllers is designed with Tape & Reel (TR) package.The part is packged with 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.The device can supply 3V~5.5V volts.With regard to operating temperature, it ranges -20°C~150°C TJ. The voltage can applied to the load at the rate of 8V~35V.Its recommended mounting way is Surface Mount.Keep the part output current at 2A.Drivers controllers is based on the A3983 part number.Drivers controllers is designed wDrivers controllersh 24 pins.There are 1 outputs available.The output voltage is maintained at 35V.The motor type can be recognized as Stepper.The maximal operating temperature reaches 85°C.The operating temperature should be higher than -20°C.Controller ic is capable of applying the device wController ich the maximum supply voltage of 5.5V.Controller ic is able to work wController ich the minimal supply voltage of 3V.

A3983SLPTR-T Features

Applications : General Purpose
Load voltage across the chip 8V~35V
base on A3983 number
designed with 1 outputs
Motor Type classified as Stepper

A3983SLPTR-T Applications

There are a lot of Allegro MicroSystems
A3983SLPTR-T motor drivers applications.

• Mobile phone display backlight and key light driving
• High power LED street light
• Large outdoor LED display
• Commercial office
• Hospitality buildings
• Smart lighting applications
• Automotive applications
• Dome
• Dash
• Footwell lighting