A4973SB-T Overview

Drivers controllers is designed with Tube package.The part is packged with 16-PowerDIP (0.300, 7.62mm) case.Drivers controllers is recommended to mount the part by Through Hole.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.The device can supply 3V~5.5V volts.With regard to operating temperature, it ranges -20°C~150°C TJ. The motor type can be classified as Brushed DC.There are 16 terminations available in the part.The voltage can applied to the load at the rate of 5V~50V.Please take in mind that this amplifier should be run at 5V.Its recommended mounting way is Through Hole.The device employs the BRUSH DC MOTOR CONTROLLER analog IC.Drivers controllers is based on the A4973 part number.Drivers controllers is designed wDrivers controllersh 16 pins.There are 1 outputs available.The output voltage is maintained at 50V.The motor type can be recognized as Brushed.Drivers controllers is also characterized by ALSO REQUIRE 5V TO 50V.

A4973SB-T Features

Applications : General Purpose
Load voltage across the chip 5V~50V
base on A4973 number
designed with 1 outputs
Motor Type classified as Brushed
Additional Feature: ALSO REQUIRE 5V TO 50V

A4973SB-T Applications

There are a lot of Allegro MicroSystems
A4973SB-T motor drivers applications.

• Mobile phone display backlight and key light driving
• High power LED street light
• Large outdoor LED display
• Commercial office
• Hospitality buildings
• Smart lighting applications
• Automotive applications
• Dome
• Dash
• Footwell lighting