A5366CA Overview

Materials from Tube are used in its packaging.Sensor and detector interface is used to save space by using the 16-DIP (0.300, 7.62mm) package.Since it is a type of Smoke Detector, it is capable of providing superior performance.As its mounting technique, the Through Hole technique is used.In order to avoid unnecessary cooling processes, the operating temperature should be kept at -25°C~75°C.Sensor and detector interface adopts Photoelectric as Sensor and detector interfaces input type.16 terminations are used to prevent signals from reflecting off the end of the transmission line.By using its base part number A5366, related electronic parts may be found.Sensor and detector interface is configured wSensor and detector interfaceh 1 functions in this case.Sensor and detector interface is powered by a voltage of 9V.16 component pins are designed for its specified functions.In Through Hole, it is mounted.As its output type, it uses Voltage.Sensor and detector interface is possible to improve efficiency by maintaining the operating supply current at 12mA.An electronic device classified under the subcategory of Other Analog ICs is designed using a unique formulation.Sensor and detector interface is maintained that 6V is the minimum supply voltage.The software is optimized for operation at the power supplies of 6/12V.Sensor and detector interface is maintained at 12V that the maximum supply voltage will be maintained.

A5366CA Features

With 9V channels
operate temperature at the range of 12mA
consumer IC type: 6V

A5366CA Applications

There are a lot of Allegro MicroSystems A5366CA applications of sensor and detector interfaces.

• System power consumption
• Resistive Elements Sensors
• Speed Sensing
• Intrusion Detection
• Accelerometers
• Motor Speed Control
• Motor drive controllers
• Tachometer
• Automation of Doors
• Crankshaft VRS Interfaces