Name: A6275EA-T
Brand: Allegro MicroSystems
SKU: A6275EA-T
Availability: InStock

new-10%

A6275EA-T

Manufacturer part number:A6275EA-T

Manufacturer:Allegro MicroSystems

Description:5V 2.54mm PMIC A6275 16 Pin 20MHz 5V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:A6275EA-T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2003
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Linear
Terminal Finish	Matte Tin (Sn)
Additional Feature	COMMON-ANODE
Subcategory	Display Drivers
Technology	BICMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	unknown
Frequency	20MHz
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	A6275
Pin Count	16
Number of Outputs	8
Qualification Status	Not Qualified
Max Output Current	90mA
Operating Supply Voltage	5V
Power Supplies	5V
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Nominal Supply Current	24mA
Output Current	90mA
Max Output Voltage	17V
Voltage - Output	4V
Topology	Shift Register
Min Input Voltage	4.5V
Max Input Voltage	5.5V
Output Current per Channel	75.5mA
Internal Switch(s)	Yes
High Level Output Current	-1mA
Low Level Output Current	1mA
Number of Segments	8
Switching Frequency	10MHz
Multiplexed Display Capability	NO
Display Mode	SEGMENT
Height Seated (Max)	5.33mm
Length	19.05mm
Width	7.62mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

A6275EA-T Product Details

A6275EA-T Overview

The 16-DIP (0.300, 7.62mm) package saves space on the board. The LED driver's design uses 8 outputs.To mount, use Through Hole.With high efficiency, it emerges as a Linear.-40°C~85°C TA is the operating temperature of the led driver.The frequency of 20MHz is used as the basis for its operation.There are 16 terminations that are designed to operate with it.To form its configuration, 16 pins are used.A total of 8 segments have been created.It is mounted in the way of Through Hole.LED drivers can be found under the base part number A6275.It's acceptable for the voltage to be 5.5V.A voltage of 4V is produced by it.The device has a pin count of 16.Further, it can be classified as Display Drivers based on its characteristics.It operates at a voltage of 4.5V as its minimal input voltage.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.The maximum supply current is reached when 5.5V is reached.A load can be supplied with 90mA current.In order to power systems, 5V voltage is needed.This electronic component can fully perform when the switching frequency is 10MHz.A LED driver that operates at 90mA output current provides all the benefits of a LED driver.Ideally, the output voltage should not exceed 17V.Moreover, this LED driver contains a COMMON-ANODE.

A6275EA-T Features

Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 10MHz
COMMON-ANODE