A6275SA Overview
Board space is saved by its 16-DIP (0.300, 7.62mm) package.LED drivers with this design have 8 outputs.The led light driver is mounted using Through Hole.It emerges as a Linear with high efficiency.It is able to work normally at the operating temperature of -20°C~85°C TA.In this case, the frequency is 20MHz.A termination of 16 is used to operate the LED driver.There are 16 pins used to form the base of its configuration.Undetermined failures may occur if the voltage supply falls below 4.5V.The number of segments is estimated to be 8.There is a mounting of it by Through Hole.A6275 is the base part number for the LED driver.5.5V is an acceptable voltage.The device has a voltage output of 4V volts.A total of 16 pins are present on this device.According to its characteristics, it is also classified into Display Drivers.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 4.5V.75.5mA is the maximum amount of current that can be supplied to the load.The power of systems depends on having 5V voltages inside.Additionally, this LED driver has a COMMON-ANODE.
A6275SA Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
COMMON-ANODE
A6275SA Applications
There are a lot of Allegro MicroSystems A6275SA LED Driver ICs applications.
- Portable lighting
- Refrigeration lighting
- Down lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Panel lighting
- Constant Voltage Power Source for portable equipment
- Street lighting
- Sports Facility Lighting
- Architectural lighting
- Linear fluorescent
