A6282EESTR-T Overview

To save board space, it uses the 24-WFQFN Exposed Pad package. This LED driver has 16 outputs.The mounting method is Surface Mount.The system emerges as a Linear with high efficiency.-40°C~85°C TA is the operating temperature of the led driver.Taking advantage of Backlight has considerable benefits.For its operation, terminations with a value of 0 are used.With a base of 24, this LED light driver is configured.If the voltage supply is lower than 3V, undetermined failures may occur.The segment count is 16.The device has been mounted on the Surface Mount.Under the base part number A6282, you'll find this LED driver.As a maximum value, 5.5V is acceptable.A 12V volt output voltage is provided by this device.In this device, there are 24 pins.In addition, it can also be categorized into Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.Whenever the supply current is lower than 45mA, it can provide high efficiency.54.5mA is the maximum amount of current that can be supplied to the load.There is 5V internal voltage required to power systems.Having the switching frequency at 30MHz enables this electronic component to perform at its best.

A6282EESTR-T Features

Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 30MHz

A6282EESTR-T Applications

There are a lot of Allegro MicroSystems A6282EESTR-T LED Driver ICs applications.

• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• White LED Backlight for portable equipment
• Museum lighting
• Constant Voltage Power Source for portable equipment
• Medical surgery lighting
• Gallery lighting
• LED headlights
• Panel lighting
• Down lights
• Linear fluorescent