A6285EETTR-T Overview

To save board space, it uses the 32-VFQFN Exposed Pad package. LED drivers have a total of 16 outputs that are used in the design of the drivers.Surface Mount is used to mount the led light driver.Linear emerges with high efficiency and reliability.The led light driver is capable of working normally at -40°C~85°C TA.The benefits of Backlight are considerable.As a result, it operates based on the frequency of 30MHz.32 terminations are designed for its operation.The LED light driver is configured with a base of 0 pins.A voltage supply below 3V may cause undetermined failures.In total, it includes 16 segments.The mount is on its way to Surface Mount.It is under the base part number A6285 that you can find this LED driver.In this case, 5.5V is acceptable.A 12V volt output voltage is provided by this device.It consists of 32 pins.The Display Drivers is also assigned based on its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.When the maximum supply current is below 40mA, it is capable of delivering high efficiency.You can supply 90mA current to the load.It is necessary to use 5V voltage to power systems.

A6285EETTR-T Features

Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
Operating with the supply voltage of 5V

A6285EETTR-T Applications

There are a lot of Allegro MicroSystems A6285EETTR-T LED Driver ICs applications.

• LED backlight driver for LCD displays for Tablets and Note PCs
• Museum lighting
• Gallery lighting
• Architectural lighting
• Panel lighting
• Other Electronic Devices
• General lighting
• Stage and Studio lighting
• Flicker-free LED Lighting using R1580N
• Replacement lamps