ACS711KEXLT-15AB-T Overview

Safety reasons require that the current sensors be placed in 12-PowerWFQFN packages. Current sensors are packaged in the Cut Tape (CT) for protection. It is recommended that current sensors provide a current that is not greater than 5.5mA. There is a termination of 12 on the current sensors. As far as the current sensor is concerned, it has 12 pins. While working, these current sensors can supply a voltage of 3.3V. Current sensors should supply a minimum voltage of 3V. It is important, however, to keep the voltage supplied by current sensors below 5.5V.

ACS711KEXLT-15AB-T Features

Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~5.5V
Frequency: DC~100kHz
Sensing Current: 15.5A
12-PowerWFQFN Package

ACS711KEXLT-15AB-T Applications

There are a lot of Allegro MicroSystems ACS711KEXLT-15AB-T Current Sensors applications.

• Industrial Monitoring and Control Systems
• Power supply management
• Continuity
• Switched Mode Power Supplies (SMPS)
• DC and AC power monitoring
• DC motor drives
• Mobile applications
• Battery supplied applications
• Overcurrent Detection
• Switched Mode Power Supplies(SMPS)