ACS723LLCTR-20AU-T Overview

A 8-SOIC (0.154, 3.90mm Width) package is used to protect the current sensors from damage. To protect the current sensors against damage, they have been packaged in the Tape & Reel (TR). It is important that current sensors do not supply more current than 14mA. A 8 termination is present on the current sensors. As far as the current sensor is concerned, it has 8 pins. There is a possibility that these current sensors will supply a voltage of 5V while they are working. The minimum voltage supplied by current sensors should be set to 4.5V. There should be no voltage greater than 5.5V supplied by current sensors. The current supplied by these electronic components should be 9mA when operating.

ACS723LLCTR-20AU-T Features

Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~80kHz
Sensing Current: 20A
8-SOIC (0.154, 3.90mm Width) Package

ACS723LLCTR-20AU-T Applications

There are a lot of Allegro MicroSystems ACS723LLCTR-20AU-T Current Sensors applications.

• Mobile applications
• Static converters for for DC motor drives
• Power supply management
• Monitor Motor Operation
• Battery chargers and systems
• Overcurrent Detection
• Static converters for DC motor drives
• Switched Mode Power Supplies(SMPS)
• Electrical drives
• AC variable speed drives