EPM3512AQC208-10 Overview

There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device is programmed with 172 I/O ports.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.208pins are programmed on the chip.When using this device, YEScan also be found.For digital circuits, there are 10000gates. These devices serve as building blocks.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.EEPROM is adopted for storing data.Surface Mountis the mounting point of this electronic part.The pins are [0].A maximum supply voltage of 3.6Vis used in its operation.It operates with the minimal supply voltage of 3V.There are a total of 172 Programmable I/Os.A frequency of 125MHzcan be achieved.There should be a temperature above 0°Cat the time of operation.It is recommended that the operating temperature be lower than 70°C.There are 32logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency be less than 116.3MHz.A programmable logic type can be categorized as EE PLD.

EPM3512AQC208-10 Features

PQFP package
172 I/Os
208 pin count
208 pins
32 logic blocks (LABs)

EPM3512AQC208-10 Applications

There are a lot of Altera EPM3512AQC208-10 CPLDs applications.

• Reset swapping
• PLC analog input modules
• Programmable power management
• Software Configuration of Add-In Boards
• Digital systems
• Storage Cards and Storage Racks
• ON-CHIP OSCILLATOR CIRCUIT
• Power up sequencing
• Digital designs
• Bootloaders for FPGAs