EPM5192JC-2 Overview

Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There are 64 I/Os on the board.Terminations of devices are set to 84.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.In this chip, the 84 pins are programmed.If you use this device, you will also find LABS INTERCONNECTED BY PIA; 12 LABS; 192 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK.A power supply of 5V is required to operate it.In this case, the maximum supply voltage (Vsup) is 5.25V.The input signals are detected by 7 dedicated inputs.Vsup (supply voltage) must be greater than 4.75V.Ideally, its clock frequency should not exceed 50MHz.It is possible to classify programmable logic as UV PLD.It is recommended that the operating temperature be kept below 70°C.

EPM5192JC-2 Features

64 I/Os
84 pin count
5V power supplies

EPM5192JC-2 Applications

There are a lot of Altera
EPM5192JC-2 CPLDs applications.

• Bootloaders for FPGAs
• Address decoders
• Custom state machines
• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate