NPA-300B-030A Overview

As a convenience, this transducer is included in 14-SOIC Module, Top Port. Temperature should be set at -40°C~125°C on transducers in order for them to work reliably. Obtaining a 3.135V~3.465V supply voltage is not a problem for the transducers. It is possible for the transducers to operate at a maximum temperature of 125°C. Temperatures below -40°C are unacceptable for the transducers. To ensure proper operation of the transducers, it is necessary to connect the 14 pins. There is a Tape & Reel (TR) package for this electronic component. A nominal supply current of 1mA can run the transducers normally. In order for the transducers to work, the voltage discharged by them should be 3.3V. If the transducer is designed to operate continuously at the rated ambient temperature, then the DC voltage should be 3.3V. You can apply a voltage of 5.5V without damaging the transducers. Minimum supply voltage 2.7V is required for the transducers to operate.

NPA-300B-030A Features

Moisture Sensitivity Level: 5A (24 Hours)
Package / Case: 14-SOIC Module, Top Port
Operating Temperature: -40°C~125°C
14 Pins
NPA-300 series
Operating Pressure: 30PSI (206.84kPa)
Operating Supply Voltage: 5V

NPA-300B-030A Applications

There are a lot of Amphenol Advanced Sensors
NPA-300B-030A Transducers applications.

• Hydrogen Storage
• Refrigerant pressure monitoring in HVAC/R systems
• Dry air system pressure, process controls and automation
• Dry air system monitoring
• Hydraulic, brake, and engine oil fluid pressure monitoring
• Air brake pressure monitoring
• Vertical velocity indication (e.g. rise/sink speed)
• Internet of things
• Enhancement of GPS navigation
• Indoor navigation & localization (floor detection, elevator detection)