5962-8777101MCA Overview
A 14-CDIP (0.300, 7.62mm) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 80μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C TA . There should be no change in the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. There are 4 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -55°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125°C. There are a total of 4 elements in this linear amplifier. As a recommendation, this electronic component should be used with a power supply that can deliver 600μA. I would like to point out that this electrical component is capable of working from a voltage below 20V as far as the power supply is concerned. The dual supply voltage of 20V should be used for the conduct of this electronic component. The Military, MIL-STD-883 indicates the series number of the op amp. There is a quiescent current of 725μA in this operational amplifier circuit. In total, there are 4 op amps on the device.
5962-8777101MCA Features
141.58dB voltage gain
5962-8777101MCA Applications
There are a lot of Analog Devices Inc.
5962-8777101MCA Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
