AD22050NZ Overview

Materials from Tube are included in the package.Using the 8-DIP (0.300, 7.62mm) package will allow you to save space.This type of Sensor Interface provides superior performance.As a mounting technique, Through Hole is utilized.Keeping the operating temperature at -40°C~125°C will prevent the use of unnecessary cooling processes.Sensor and detector interface uses the input type Voltage.To prevent signal reflection off the ends of transmission lines, 8 terminations are utilized.Related electronic parts can be found according to its base part number of AD22050.The system is configured with 1 functions.The voltage supply is 5V.The device is an electronic device with 8-pins.Pins on 8 components are designed to fulfill the functions specified by the component.Sensor and detector interface is mounted in the way of Through Hole.Sensor and detector interface uses Analog as Sensor and detector interfaces output type.By maintaining the operating supply current at 200μA, more efficiency can be achieved.There will be a failure when the supply voltage exceeds 36V.There will be failures if the supply voltage falls below 3V.There are 1 channels designed for the transmission of data.In applications with a supply voltage of 5V, it is used.

AD22050NZ Features

With 5V channels
operate temperature at the range of 200μA

AD22050NZ Applications

There are a lot of Analog Devices Inc. AD22050NZ applications of sensor and detector interfaces.

• Frequency and voltage inverters
• Humidity Sensors
• Position sensor
• Speed Sensing
• Seat Movers
• Vehicle Speed VRS Interfaces
• Window Lifters
• Transducers and Transmitters
• Portable Medical
• Tachometer