AD5243BRMZ2.5 Overview
It is contained in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) pacakge.By Volatile, this pentometer begins to be stored.The digital potentiometer embeds 2 circuits.To secure the digital analogic, it can be accessed in the Tube package.For this pentometer, there are 256 taps that protect against overcurrent.There are 256 positions in pentometer.The terminations are set at 10.You can refer to 2 functions in this programmable potentiometer.The total resistance of the speed potentiometers will be 2500Ohm as shown.In order for it to perform, it relies on 3V.In the digi devices, there are 10 pins.In general, Surface Mount is recommended for mounting.2.7V~5.5V voltage can be supplied by the potentionmeter.A digital potentiometer has a temperature range of -40°C~125°C.A flow rate limit of 2.5kOhm is possible.In the AD5243 family, pentometer belongs.The mount is Surface Mount.This potentiameter gets 10 pins on it.The potentiometer conducts in a supply voltage of 5.5V.At 3/5V, it delivers voltage.Here are the additional features of this digital potentiometer: IT ALSO OPERATES AT 5 V SUPPLYThe supply current must be operated at 3.5μA in order to deliver its performance.High accuracy can be achieved with 400kHz frequency.There is a maximum limdigital potentiometer of 3.5μA in terms of supply current.As long as 3.5μA is set, potentiameter consumes quiescent current.Transferring data requires 4.8MHz bandwidth.
AD5243BRMZ2.5 Features
Available in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
2 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
10 pins
Operate supply voltage at the range of 5.5V
Quiescent Current at 3.5μA
AD5243BRMZ2.5 Applications
There are a lot of Analog Devices Inc. AD5243BRMZ2.5 Digital Potentiometers applications.
- DAC
-
- Power meter
-
- Speakers
-
- Instrumentation (gain or offset adjustment)
-
- Automotive electronics
-
- Audio devices with up to 90dB dynamic range
-
- Automatic gain control
-
- Contrast control of monitors
-
- Power supply
-
- Adjust VCOM settings
-
