In order to package it, Tube are used.It is embedded in the 16-CDIP (0.300, 7.62mm) package for cost-effectiveness.There is a tendency to use 2-Quadrant bits per stage.A voltage of 5V is used as the supply voltage for this device.There is a nominal negative supply voltage of -5V.There is a modulated radio-frequency signal in the range of 60MHz.16 terminations have been designed to prevent reflections from the transmission line.Electronic parts with a number of similarities can be found under its base part number AD539.It is a type of 16-pin electronic component that is known for its high quality and superior performance.It is an electronic device that falls under the subcategory of Analog Computational Functions.To mount it on the PCB, Through Hole is used.Electronic devices should be operated at a maximum temperature of 125°C.A minimum operating temperature of -55°C should be maintained for the electronic device.Reflow temperature limit NOT SPECIFIED is determined by the component with the lowest temperature tolerance.In addition, it is ideally suited for the operating supply voltage of 10.2mA.The dual supply voltage should be higher than 4.5V.It is recommended that the dual supply voltage be lower than 15V.The ANALOG MULTIPLIER OR DIVIDER integrated circuit operates on an analog basis.A modulated radio-frequency signal falls within the frequency range of 25MHz.The device is capable of supporting the maximum voltage input of 4.2V, which allows designers to take full advantage of its flexibility.The number of bits of information that can be stored is 2.The device is capable of operating from a supply voltage of 15V.
AD539KDZ Features
Supplied in the 16-CDIP (0.300, 7.62mm) package Bandwidth of 60MHz Operating supply current of 10.2mA Operating supply voltage of 15V
AD539KDZ Applications
There are a lot of Analog Devices Inc. AD539KDZ Analog Multipliers & Dividers applications.
