AD650KNZ Overview

Located within the 14-DIP (0.300, 7.62mm) package, it can be found here. A part of this electronic device is mounted in the manner indicated by Through Hole. Tube packages it in this way. An electrical device of the type Volt to Frequency and Frequency to Volt is being used. It is possible to terminate a transmission line with a 14 termination, which is an end device that matches the line's characteristic impedance. This device has a pin count of 14. Power is provided to the device by a supply voltage of 15V. Associated parts can be founded based on the base part number. In computers and other types of communication devices, there are 14 pins, which are pronged contacts. For the sake of reliability, it is set to operate at a minimum operating temperature of 0°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 70°C. Through Hole is mounted in the way. This device operates at a frequency of 1MHz. In order for 8mA to play its full role, it must be supplied with an appropriate supply current. A maximum input type of 11V is available for this electronic part. A dual voltage supply of 15V powers the device. Electronic parts of this type have a supply type of Dual. This electronic part has a maximally negative input type of -10V. There is an output voltage of 400mV supported by it. 1MHz represents the bandwidth of the electrical device.

AD650KNZ Features

14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 15V

AD650KNZ Applications

There are a lot of Analog Devices Inc.
AD650KNZ V/F & F/V Converters applications.

• Cruise Control
• Automotive Door L ock Control
• Clutch Control
• Horn Control
• Touch or Sound Switches
• lsolation of High Common-Mode Voltages
• Low-Cost Analog-to-Digital Conversion
• Battery Monitoring
• Automotive Sensing
• Voltage to Frequency Conversions