AD7989-5BRMZ-RL7 Overview

The analogue to digital converter is designed with 18 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.375V~2.625V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.25 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to AD7989 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply that can be categorized according to Single.The supply/digital voltage of this electrical AD converter is 2.375V~2.625V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 2.625V.It operates with the minimal supply voltage of 2.375V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 2.5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 4.3mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 5.1V.The digital converter supports the minimal input voltage of 2.4V.It is a type of FPGA belonging to the PulSAR? series.

AD7989-5BRMZ-RL7 Features

1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.375V
PulSAR? series

AD7989-5BRMZ-RL7 Applications

There are a lot of Analog Devices Inc. AD7989-5BRMZ-RL7 ADC applications.

• Imaging Systems
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Micro and pico cell systems, software radios
• Broadband data applications
• 4-channel data acquisition
• Scientific instruments
• Communication test equipment
• Automotive
• Digital Multimeters, PLC's (Programming Logic Controllers)
• AC motor control