AD8021ARZ-REEL Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the Voltage Feedback type. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 7.7mA, this op amp ic can operate. There should be no change in the voltage gain at 76dB. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 10V voltage. Linear amplifier has a quiescent current of 7.7mA.

AD8021ARZ-REEL Features

8 Pins
supply voltage of 5V
76dB voltage gain

AD8021ARZ-REEL Applications

There are a lot of Analog Devices Inc. AD8021ARZ-REEL Instrumentational OP Amps applications.

• MP3
• Portable electronic products powered by batteries
• Subtraction operation circuits
• Weak signal detection
• Commercial audio systems
• Portable docking station
• Vehicle electronics
• Switching amplifier
• Thermocouples
• Test equipment