With the enhanced 40-WFQFN Exposed Pad, CSP package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tape & Reel (TR) package.With its Receiver can transceiver design, this part can be incorporated into a wide range of solutions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a ±4.5V~5.5V power supply.Up to 0/3 receivers/drivers can be installed simultaneously on this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.This wide receiver has 40 terminations for driving and receiving data signals.There are 40 pinouts available on this transceiver which are market standard.Since the base part number AD8123 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation driver IC with 40 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In the case of this receiver, a resolution of 3 bits is typically specified.IC+-5V is a high performance driver IC designed to work with a +-5V power supply.With an input voltage of 132mA, this integrating circuit has the ability to drive LEDs with an output voltage of 132mA.You should keep the temperature of the line driver ic above -5V during operation.This optical transceiver is embedded with 3 channels in total.