The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package conserves board space. For the design of these LED drivers, 1 outputs are used.Surface Mount is used for mounting.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -40°C~125°C TA.Automotive benefits significantly from the program.In this case, the frequency is 500Hz.In this case, it uses 8 terminations.This LED driver is configured with a base of 8 pins.There are 6 segments.It has been mounted on Surface Mount.It is under the base part number AD8240 that you can find this LED driver.It is acceptable to supply voltages of 27V.A voltage output of 12V is provided by this device.On it, there are 8 pins.As a result of its characteristics, it is also classified as Display Drivers.This device operates with a minimum input voltage of 9V volts.The maximum efficiency can be achieved by operating it at a minimal voltage of 9V.In terms of supply current, 27V is the maximum value.If the maximum supply current is less than 360μA, the device is capable of providing high efficiency.The current that can be supplied to the load is 500mA.This electronic component can fully perform when the switching frequency is 500Hz.When operating at the maximum output current of 500mA, it is capable of providing all the benefits associated with LED drivers.It is important to keep the output voltage below 27V.
AD8240YRMZ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package Operating temperature of -40°C~125°C TA Frequency of 500Hz Supply voltage of 13.5V Switching frequency of 500Hz
AD8240YRMZ Applications
There are a lot of Analog Devices Inc. AD8240YRMZ LED Driver ICs applications.
Ultraviolet (UV) and Infrared (IR) Irradiation Devices
Portable lighting
A- lamps
Refrigeration lighting
General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
Architectural lighting
Down lights
Industrial LED Lighting: Image Recognition Devices