For its packaging, Tape & Reel (TR) are used.For cost-effectiveness, it has been included in the 8-SOIC (0.154, 3.90mm Width) package.There is a tendency to use 4-Quadrant bits per stage.A voltage of 5V is used for its operation.For -5V, a nominal negative supply voltage is provided.An RF signal modulated at 500MHz occupies the frequency range of 500MHz.To prevent signals from reflecting off the end of the transmission line, there are 8 terminations.This part number AD834 has a number of similarities to other electronic parts.This is a type of 8-pin electronic component with a high reputation for quality and performance.There is an electronic device in the subcategory Analog Computational Functions that falls under this classification.It is mounted on the PCB using the Surface Mount method.A maximum temperature of 85°C should be maintained for the electronic device to operate.A temperature of -40°C should be maintained for the electronic device in order to enable it to operate.It is based on the component with the lowest tolerance for high temperatures that we determine 260's reflow temperature limit.In addition, it is ideally suited for the operating supply voltage of 35mA.A dual supply should have a voltage that is higher than 4V.It is recommended to use dual supply voltages less than 9V.Modulated radio-frequency signals occupy the frequency range of 500MHz.As it supports a maximum input voltage of 1V, it ensures that designers can take full advantage of its flexibility.5V is the dual supply voltage for this device.There is the possibility of storing 4 bits of information.A voltage of 9V is required to operate it.It incorporates elements of 1.To avoid failures, the frequency should not exceed 500MHz.
AD834JRZ-RL Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package Bandwidth of 500MHz Operating supply current of 35mA Operating supply voltage of 9V
AD834JRZ-RL Applications
There are a lot of Analog Devices Inc. AD834JRZ-RL Analog Multipliers & Dividers applications.