AD8548ACPZ-R7 Overview

In order to protect the op amps, a LFCSP EP case is used. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. An 16-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 18μA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 120dB. The buffer amp consists of 4 circuits in total. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For this linear amplifier to work, the temperature should not be below -40°C. At temperatures greater than 125°C, op amp should not be used. As a whole, there are 4 elements that make up this buffer amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 18μA. The electrical part is capable of being powered by a voltage of under 18V, which means that it can be used with any voltage supply. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage. In order to conduct this part, you will need to provide dual supply voltages of 9V volts.

AD8548ACPZ-R7 Features

120dB voltage gain
Output Type: Rail-to-Rail

AD8548ACPZ-R7 Applications

There are a lot of Analog Devices Inc. AD8548ACPZ-R7 Instrumentational OP Amps applications.

• Video data acquisition
• Video conversion and routing
• High input resistance broadband
• Radar
• Industrial control system
• Weak signal detection
• Band-pass filter
• Laptop
• Proportional counter tubes
• Strain gauges