AD8602DR-REEL7 Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 3V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 750μA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 95.56dB at all times. This op amp ic has 2 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. It is possible to count 2 elements on this buffer amplifier. The instrumentation amplifier is packed in the form of TAPE AND REEL. The DigiTrim? represents the op amp's series number.

AD8602DR-REEL7 Features

8 Pins
supply voltage of 3V
95.56dB voltage gain
Output Type: Rail-to-Rail

AD8602DR-REEL7 Applications

There are a lot of Analog Devices Inc. AD8602DR-REEL7 Instrumentational OP Amps applications.

• Portable docking station
• Hand-held batteries
• Commercial audio systems
• Fast A/D and D/A converters
• Proportional counter tubes
• E-book readers
• Information processing
• Displayers for aircraft and air transportation control systems
• High gain DC amplifier
• Medical instruments